Perma-Line

BlueWater Manufacturing

$0.00
Perma-Line is a cost-effective, permanent visual warning line system for roof edge warning and controlled access zones.

Perma-Line – Permanent visual warning line system for controlled access zones

Perma-Line is a cost-effective, permanent visual warning line system for roof edge warning and controlled access zones. Once in place, the Perma-Line remains intact until you want to move it. No drilling is necessary for installation, preserving the integrity of your roof. The Perma-Line System has durable metal flags which means no more monthly trips to your rooftop to replace worn or torn plastic flagging. The system exceeds OSHA regulations for warning line systems. Perma-Line is not a motion stopping device.

Basic Use

The Perma-Line System can greatly reduce the cost of an entire roof installation by visually protecting the non-serviceable areas of your roof and creating controlled access zones.

OSHA Compliance

The Perma-Line System exceeds OSHA regulations for warning line systems. Flagging line with base and support stanchion is 39 inches high per OSHA requirements. Bases, stanchions and cable must be placed so that the cable and flagging is not less than 34” high between the stanchion supports. Call Dakota Safety for more information on the proper application and installation of Perma-Line permanent visual warning line systems.

Features

  • Non-penetrating system
  • Reduces the cost of an entire roof installation
  • Exceeds OSHA regulations for warning line systems
  • Powder Coat Yellow and Galvanized Finishes available

Contact Us for your Visual Warning Line Systems

Request a quote today, or contact Dakota Safety for more information on Permanent & Portable Visual Warning Line Systems.

I n order to meet OSHA regulations for fall protection, outriggers (returns/counter weights) MUST be utilized. Whether the Danger Side Run is 5’ or 1000’ in length, you must have these in place at the beginning and at the end of the run.

Outriggers are standard rail kits (usually 5ft rail kits) that are connected at each start/end at approximately 90˚ to the Danger Side Run of each start / end of rail systems.

Outriggers (returns/counter weights) are not required for closed loop systems (no start ends).

An extra base is required to complete an open rail system (rail sections with start/ends); one rail section in the system requires 2 bases (kits only include 1 base)

NOTE: Please consult Dakota Safety if wind loads are required for rail systems. Additional outrigger sections adding counterweights can be added to rail systems to increase wind load compliance.
  • Delivery via LTL
  • Delivery Timing

Orders Placed

Delivery

Time

Monday - Friday, before 6pm Delivery estimate of 1-3 working days commences on the same working day the order is made. #Your order will arrive between Monday - Friday.
Monday - Friday, after 6pm Delivery lead-time of 1-3 working days commences on the next working day from when the order is made.
Saturday and Sunday Delivery estimate of 1-3 working days commences on the next working day from when the order is made.

  • For more details, check our FAQs out here!