Dakota Safety has a variety of non-penetrating (ballasted) guard rails and fixed (or attached) modular guardrails to provide the best solution to your fall protection situation. This roof safety equipment is designed for easy installation.
Non-Penetrating systems use a weighted or ballasted base and the use of outriggers to provide the OSHA required 200lbs of load force for the railing. All of the non-penetrating systems use the same weighted base system except the SG series metal roof rail system. The finish on the bases is either safety yellow or galvanized.
The rail sections meet the OHSA requirements for rail height of the top rail at 42" +/- one inch from the roof surface and a mid-rail. All the rail sections incorporate into the standard weighted base for use as roof safety equipment.
SafetyRail 2000 (SR2K) uses a standard sized rail section for the guardrails. Finish is either safety yellow or galvanized. Select colors can be also be done.
SafetyRail 2000 Architectural Series has a more architectural look where building aesthetics are important by using a pipe and fitting system. Curved or Incline stanchions are available to reduce line of site of these guardrails. Standard finish is galvanized.
SafetyRail 2000 D300 Architectural Serieshas a 300lb load (50% safety factor) + uses 3 horizontal rails for added safety for these guardrails. Only available with curved stanchions which reduce line of site. Standard finish is galvanized.
SafetyRail 2000 Stealth Rail - Collapsible sized rail sections guardrails. Finish is safety Yellow. Rail sections can be folded down when not in use.
Hatch Defender - rail system with gate that attaches to roof curb without penetrations.
SG Series - Metal roof railing guardrail system utilizing S3 clamps and Architectural Series railing
KwikGuard- Custom designed fixed railing system for chillers, paint booths and other special applications
KwikRail - fixed modular guardrail and handrail system
Versa-Clamp - reversible, clamp on stanchions for parapets and slabs