KwikGuard

BlueWater Manufacturing

$0.00
Kwik Guard is a custom-designed fall protection guard rail system for chillers, Roof HVAC, fuel storage tanks, ovens, paint booths, and other special applications.  Dimension Worksheet

Kwik Guard Modular Handrail Safety System

Kwik Guard is a custom-designed fall protection guard rail system for chillers, fuel storage tanks, ovens, paint booths, and other special applications. The Kwik Guard system is designed to provide OSHA-complaint fall protection without penetrating the tank or unit on which it is installed. A concrete pad is required; if not present, concrete footings may be poured. Testing by a third-party engineering firm has confirmed this system complies with all applicable OSHA regulations.

The system is mounted with standard anchor bolts and is assembled using Kwik Fit structural pipe fittings that require a hex key to tighten the fitting connections. Standard self-closing safety gates can be easily mounted to rail sections to provide access through the rail.

Dimension Worksheet

Kwik Rail Kits

The following Kwik Rail kits are available from Dakota Safety:

  • 6’ rail only
  • 12’ straight run
  • 6’ x 6’ corner section
  • 6’ extension
  • 6’ 90° extension

Features of Kwik Rail & Kwik Guard Modular Railing Systems

  • Compliant with OSHA and BOCA standards
  • Powder coat painted finish in safety yellow, other colors available upon request
  • Easily assembled with a single hex key
  • Mounts with standard anchor bolts
  • 1 1/2" pipe (1.90"O.D)

Supporting Documents

  • Kwik Rail Product Data Sheet
  • Kwik Fit Fittings

Contact Us for Modular Safety Railing Solutions

Dakota Safety is your #1 source for industrial safety products. Request a quote on a Kwik Rail or Kwik Guard modular railing system, or contact Dakota Safety for more information.

I n order to meet OSHA regulations for fall protection, outriggers (returns/counter weights) MUST be utilized. Whether the Danger Side Run is 5’ or 1000’ in length, you must have these in place at the beginning and at the end of the run.

Outriggers are standard rail kits (usually 5ft rail kits) that are connected at each start/end at approximately 90˚ to the Danger Side Run of each start / end of rail systems.

Outriggers (returns/counter weights) are not required for closed loop systems (no start ends).

An extra base is required to complete an open rail system (rail sections with start/ends); one rail section in the system requires 2 bases (kits only include 1 base)

NOTE: Please consult Dakota Safety if wind loads are required for rail systems. Additional outrigger sections adding counterweights can be added to rail systems to increase wind load compliance.
  • Delivery via LTL
  • Delivery Timing

Orders Placed

Delivery

Time

Monday - Friday, before 6pm Delivery estimate of 1-3 working days commences on the same working day the order is made. #Your order will arrive between Monday - Friday.
Monday - Friday, after 6pm Delivery lead-time of 1-3 working days commences on the next working day from when the order is made.
Saturday and Sunday Delivery estimate of 1-3 working days commences on the next working day from when the order is made.

  • For more details, check our FAQs out here!