Equipment near a roof edge
Share the distance from the equipment and actual service position to the exposed edge. Include the parapet, service-panel locations, and the space needed to work.
Explore roof-edge protection →ROOFTOP HVAC & EQUIPMENT
Plan safer access to rooftop HVAC and equipment.
Service work near a roof edge, on top of equipment, or beyond pipes and ducts starts with different questions. Show us where technicians work and how they get there.
THE SITUATION
Where does the technician work—and how do they get there?
Review the service position and the complete route from roof access. Is the task beside an exposed roof edge, on an elevated equipment surface, or reached by crossing obstacles? Use the routes below to describe the situation before selecting a product.
CHOOSE YOUR SITUATION
Start with the service task and location.
Work on top of equipment
Send the make, model, dimensions, and photos showing the service surface and structural frame. Ask for an equipment-specific review before selecting rails or mounting locations.
Explore equipment-top protection →Routes over pipes or ducts
Show the obstacle height and width, the approach direction, and available landing space. Include how technicians carry tools or reach service points.
Explore crossover access →Walking routes across the roof
Share the route from the hatch or ladder to the equipment, the roof membrane, and nearby openings or edges. Identify the walking surface and edge exposure separately.
Explore rooftop walking routes →These routes identify different review needs, not interchangeable products. An equipment-top system does not by itself establish a protected route to the unit or resolve a separate roof-edge exposure.
FIND THE RIGHT APPROACH
Compare equipment and access options.
The products below address equipment-top work, walking surfaces, and obstacle crossings. For a service position near an exposed roof edge, start with the roof-edge route above and review the complete layout.
Equipment-top guardrail
BEST FOR
Technicians working on top of chillers and elevated mechanical equipment.
EquipGuard mounts to a suitable structural frame. Confirm frame integrity, manufacturer approval and service clearances; do not mount to sheet-metal casing.
EquipGuard →
Slip-resistant rooftop walkway
BEST FOR
Repeated travel across compatible PVC or TPO roof surfaces.
Define a walking route and help protect the roof membrane. Matting is not a guardrail or a substitute for fall protection near exposed edges.
CrossGrip Roof Matting →
Crossover ladder or platform
BEST FOR
Routes interrupted by pipes, ducts or other obstacles.
Match the crossover to obstacle height, width and available landing space. Confirm the configuration and installation requirements for your site.
AdaptaStep Modular Access System →PLAN YOUR PROJECT
What do we need for a recommendation?
Share equipment photos or a roof layout showing where the technician stands and the route used to reach that position. Include the details below; identify measurements that are still approximate.
- Equipment make, model, nameplate and overall dimensions.
- Photos of all four sides, structural frame and service panels.
- Preferred ladder access and clearances needed for maintenance.
- Roof access point, route to the equipment, and measured distances from the equipment and service positions to nearby edges.
- Parapet height, roof openings, and the location and swing of service panels.
- Pipes, ducts, obstacle dimensions, roof membrane, mounting restrictions, and project timeline.
System selection, mounting and installation requirements must be confirmed for your site.
PRODUCT RESOURCES
Find specifications and supporting documents.
Find the EquipGuard dimension worksheet and product documents on its product page. Use the download center for other supporting documents.
EquipGuard worksheet and documents →
View the download center →